MC52i AT Command Set

MC52i AT Command Set
15.17 AT^SSTGI
15.17 AT^SSTGI SAT Get Information - Get Inkey (34)
This command shall be used after receiving the URC ^SSTN: 34.
The TE is asked to prompt the user for an input, which is a single character. Help can be requested by the user,
if available.
Syntax
Write Command
AT^SSTGI=34
Response(s)
^SSTGI: , , , ,
OK
ERROR
+CME ERROR:
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
- + + + + + - - -
Parameter Description
(num)
34 Proactive command ID, see Remote-SAT Command Types
(num)
0...255 Used as bit field
bit 1 0: Digits only (0 9, *, # and +)
1: Alphabet set
bit 2
0: SMS default alphabet (GSM character set)
1: UCS2 alphabet
bit 3
0: Character sets defined by bit 1 and bit 2 are enabled
1: Character sets defined by bit 1 and bit 2 are disabled and the "Yes/No"
response is requested
bit 4-7
RFU
bit 8
0: No help information available
1: Help information available
(str)
String as prompt for text.
(num)
0...255 Used as bit field
bit 1
0: Icon is self explanatory and replaces text
1: Icon is not self-explanatory and shall be displayed with the text Determined
value only if associated icon ID is not 0 (an icon exists).
bit 2-8
RFU
MC52i_ATC_V01.201 Page 417 of 551 4/16/10
Confidential / Released