MC52i AT Command Set

MC52i AT Command Set
4.5 ATE
4.5 ATE Enable command echo
The ATE command determines whether or not the TA echoes characters received from TE during command
state.
Syntax
Exec Command
ATE[]
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last Reference(s)
- + + + + + - - - V.250
Parameter Description
(num)(&W)(&V)
[0] Echo mode off
1 (&F) Echo mode on
Note
• In case of using the command without parameter, is set to 0.
MC52i_ATC_V01.201 Page 93 of 551 4/16/10
Confidential / Released