MC52i AT Command Set

MC52i AT Command Set
15.3 Remote-SAT Command Types
15.3 Remote-SAT Command Types
The Command Type value (cmdType) identifies the type of command or associated response passed between
the TE and the ME.
cmdType is the parameter that comes first in AT commands, in responses to AT^SSTGI and AT^SSTR commands,
and in the "^SSTN" URC. Also, the cmdType values may be used as Next Action Indicator for the SETUP
MENU and for SELECT ITEM.
The SAT implementation supports SAT class 3 (GSM 11.14 Release 99, letter class "c"). Therefore, Table 15.6
summarizes only those command types and parameters which may appear on the user interface (UI) and thus,
allow the user to take an action. Command types that are transparent to the user are not listed in the table,
although they are supported by Remote-SAT as specified in GSM 11.14.
Table 15.6: Command Type Table
Command types supported by Remote-SAT; i.e. UI related
cmdType
value
(dec.)
SSTGI
applicable
Used as
Next Action
Indicator
as specified
in GSM
11.14
SSTR
required
Auto Terminal
Response
Timeout
Terminal
Response
Command Name
Proactive commands (TE