MC52i AT Command Set

MC52i AT Command Set
15.33 AT^SSTR
• The parameter of AT^SSTA determines the alphabet used on the AT command interface, while
the value reported by the bit 2 of the AT^SSTGI=34 command determines the set of
characters allowed. If these alphabet settings are different, the following applies:
Example: If UCS2 alphabet is selected with AT^SSTA and the bit 2 of the
AT^SSTGI=34 command is reported as "SMS default alphabet (GSM character set)" any input has to be done
in UCS2 alphabet. However, take care to enter only UCS2 characters for which equivalent characters are
defined in the SMS (GSM) default alphabet. In this case, the ME will correctly translate the given UCS2 data
into a TERMINAL RESPONSE coded in SMS (GSM) default alphabet. See also Section 1.6.2, UCS2 and
GSM character coding and conversion.
MC52i_ATC_V01.201 Page 438 of 551 4/16/10
Confidential / Released