MC52i AT Command Set

MC52i AT Command Set
11.5 AT+CGEREP
URC 5
+CGEV: NW DETACH
The network has forced a GPRS detach.
URC 6
+CGEV: ME DETACH
The mobile equipment has forced a GPRS detach.
URC 7
+CGEV: NW CLASS
The network has forced a change of MS class. The highest available class is reported.
URC 8
+CGEV: ME CLASS
The mobile equipment has forced a change of MS class. The highest available class is reported.
Parameter Description
(num)
0 (P) Buffer unsolicited result codes in the MT. Currently 3 +CGEV URCs can be
buffered. If MT result code buffer is full, the oldest ones will be discarded. No
codes are forwarded to the TE.
1 Discard unsolicited result codes when MT TE link is reserved (e.g. in on line
data mode); otherwise forward them directly to the TE.
2 Buffer unsolicited result codes in the MT when MT TE link is reserved (e.g. in
on line data mode) and flush them to the TE when MT TE link becomes available;
otherwise forward them directly to the TE. Currently 3 +CGEV URCs can
be buffered. If MT result code buffer is full, the oldest URCs will be discarded.
(num)
0 MT buffer of unsolicited result codes defined within this command is cleared
when 1 or 2 is entered
1 MT buffer of unsolicited result codes defined within this command is flushed to
the TE when 1 or 2 is entered (OK response will be given before flushing
the codes). Buffer is empty afterwards.
(str)
Parameter indicates the GPRS mobile class.
“B“
class B
MC52i_ATC_V01.201 Page 285 of 551 4/16/10
Confidential / Released