MC52i AT Command Set

MC52i AT Command Set
10.12 Examples of how to Configure and Use Internet Service Profiles
^SISR: 1, 578
Command response indicates that 578 bytes are
available for reading.
Return-Path:
X-Original-To: subscriber1@testdomain.com
Delivered-To: subscriber2@testdomain.com
Received: from 10.10.0.132 (unknown [10.10.0.132])
by testdomain.com (Postfix) with SMTP id 379321D004
for ; Tue, 20 Dec 2005 08:00:07 +0100 (CET)
To: subscriber2@testdomain.com
Cc:
From: subscriber1@testdomain.com
Subject: TestMail
Message-Id:
Date: Tue, 20 Dec 2005 08:00:07 +0100 (CET)
X-UIDL: &lL"!(Z6"!^cl!!1+%"!
Status: RO
Hallo Tom!Bye Bye Tom!
. Dot indicates end of mail according to RFC 2821.
OK
at^sisr=1,1000
^SISR: 1,-2
Try to read 1000 bytes once again.
No more data available to read, i.e. the service has
finished.
OK
at^sisi=1 Check the connection state of service profile 1.
^SISI: 1,6,578,0,0,0
The command response indicates that the POP3
OK
service is in state "6" (Down) and that 578 bytes have
been retrieved.
at^sise=1 Check error status of service profile 1.
^SISE: 1,0
The command response confirms that no error
occurred.
OK
at^sisc=1
OK
Close the service.
10.12.14 HTTP POST (Polling Mode)
at^siss=1,srvType,"Http"
Select service type HTTP.
OK
at^siss=1,conId,1 Select connection profile 1.
OK
at^siss=1,hcMethod,1
Select "Post" method.
OK
at^siss=1,address,"http://192.168.1.3/datafiles/dummy/dummy.txt"
OK
at^siss=1,hcContLen,180
Try to upload 180 bytes.
OK
at^siso=1
Open the service.
OK
at^sisw=1,100
Send the first 100 bytes.
^SISW: 1, 100, 0
OK
at^sisw=1,100
Try to send again 100 bytes.
^SISW: 1, 80, 0
80 bytes are sent.
OK
at^sisw=1,40
Try to write data once again.
MC52i_ATC_V01.201 Page 273 of 551 4/16/10
Confidential / Released