You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5<br />
Program<br />
No.<br />
6<br />
SPF automatic<br />
original discharge<br />
time (if installed)<br />
1 5 min., *2 30 min.,<br />
3 60 min., 4 120 min.,<br />
5 240 min., 6 OFF<br />
10<br />
Resolution of AUTO<br />
& MANUAL mode<br />
*1 300dpi, 2 600dpi<br />
21 Reset factory 1 YES, *2 NO<br />
24<br />
25<br />
26<br />
27<br />
28<br />
29<br />
Mode<br />
Prevention of OC<br />
copies when the<br />
SPF is up function<br />
Copy effective paper<br />
width setting function<br />
(Bypass tray)<br />
Copy effective paper<br />
width setting function<br />
(Tray 1)<br />
Copy effective paper<br />
width setting function<br />
(Tray 2 if installed)<br />
Selection of copy<br />
start state (Polygon<br />
rotation on/off)<br />
Fusing temperature<br />
setting when the<br />
bypass tray is used<br />
*1 ON, 2 OFF<br />
*1 Large (A4 width),<br />
2 Small (B5R width)<br />
*1 Large (A4 width),<br />
2 Small (B5R width)<br />
*1 Large (A4 width),<br />
2 Small (B5R width)<br />
*1 ON, 2 OFF<br />
1 Low, *2 High<br />
Parameters<br />
* Factory default settings are indicated with an asterisk (*).<br />
Press the start ( ) key. The right-hand number in the display<br />
will be steadily lit and the entered value will be stored.<br />
To change the setting or to set another mode, press the clear<br />
( ) key. The unit will return to step 2.<br />
6<br />
Press the light ( ) key to return to the normal copy mode.<br />
DISPLAYING TOTAL NUMBER OF COPIES<br />
Use the following procedure to display the total number of copies.<br />
1<br />
Press and hold down the clear ( ) key for approximately 5 seconds.<br />
The total number of copies will appear in two steps, each with three<br />
digits.<br />
Example: Total number of copies is 1,234.<br />
44