You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
IF A PAPER MISFEED OCCURS IN THE MAIN UNIT<br />
WHEN USING THE SPF<br />
If a paper misfeed occurs in the main unit paper path when making copies with<br />
original(s) through the SPF, the SPF will automatically stop scanning. <strong>Manual</strong>ly<br />
remove the misfed paper(s) in the main unit. You can check the number of originals<br />
that must be returned to the document feeder tray in the display on the operation<br />
panel. Follow the steps below to display the number of originals to be returned.<br />
The following procedure omits removal of the misfeed. Be sure to remove<br />
the misfeed before displaying the number of originals to be returned. For<br />
the misfeed removal procedure, see "MISFEED REMOVAL" (p.52).<br />
1<br />
2<br />
When a paper misfeed occurs in the<br />
main unit, the SPF stops and the ZOOM<br />
indicator blinks.<br />
The remaining number of sets will blink in the<br />
display.<br />
Be sure to remove misfed paper(s) at the main<br />
unit paper path first. Then follow the step 2<br />
onwards.<br />
Remove any originals that have not yet<br />
been scanned from the document<br />
feeder tray.<br />
For the original(s) stuck in the SPF, do not<br />
remove manually. This may cause a machine<br />
malfunction. See the step 3.<br />
A5<br />
A4<br />
A4<br />
A4<br />
B5<br />
A5<br />
3<br />
Press the copy ratio display (%) key.<br />
The originals that were being scanned in the SPF<br />
will be discharged and the number of original<br />
sheets to be returned will blink in the display.<br />
Place the displayed number of original sheets<br />
back in the document feeder tray together with<br />
the original sheets removed in step 2.<br />
A5<br />
A4<br />
A4<br />
A4<br />
B5<br />
A5<br />
A4<br />
B5<br />
A5<br />
8<br />
Display of number of original<br />
sheets to be returned<br />
If "SPF automatic original discharge time" is enabled in the user<br />
programs, the originals in the SPF will be automatically discharged after<br />
the set time elapses. ("USER PROGRAMS" (p.43)<br />
59
Change language