M800 Gas Flow Computer - Spirax Sarco

More documents

Recommendations

Info

Orifice meters Beta ratio Nominal pipe diameter Differential pressure Outputs 4-20 mA <strong>Flow</strong> Temperature Pressure Maximum 0.75 Minimum 0.1 Maximum 1000 mm (39.37") Minimum 50 mm (2") following the ISO standard 12.5 mm (½") absolute minimum Maximum 747.27 mbar (300" wg) Minimum 0 Maximum 1 999 999 Nm³/h (1177154 scfm) Minimum 0 Maximum 500°C (932°F) Minimum -100°C (-148°F) Maximum 119 bar g (1725.95 psi g) Minimum 0 78 IM-P333-25 MI Issue 2
IM-P333-25 MI Issue 2 79
Page 1 and 2:
3330951/ 2 IM-P333-25 MI Issue 2 M8
Page 3 and 4:
The symbols, used on the product an
Page 5 and 6:
1.11 Permits to work All work must
Page 7 and 8:
3. System overview 3.1 Orifice plat
Page 9 and 10:
3.3 Gilflo ILVA mechanical installa
Page 11 and 12:
3.5 4 - 20 mA linear device mechani
Page 13 and 14:
4.1 Wall mounted version h Fig. 7 F
Page 15 and 16:
h b Fig. 12 a h c 3. Unclip the hi
Page 17 and 18:
Fitting of option boards 1. Isolate
Page 19 and 20:
5.2 Important - Please read the fol
Page 21 and 22:
5.4 Wiring diagram - Vortex flowmet
Page 23 and 24:
5.6 Wiring diagram - Pulsed output
Page 25 and 26:
RS485 option board Additional notes
Page 27 and 28: Master 1200 m (4000 ft) -Tx Tx T Rt
Page 29 and 30: Run mode data sequence 20290 Nm³
Page 31 and 32: 6.3 Commissioning mode The commissi
Page 33 and 34: Continued from page 32 Commissionin
Page 35 and 36: Commissioning mode • Basic Data C
Page 37 and 38: 6.5.1 Commissioning sequence for th
Page 41 and 42: To page 40 Continued from page 40 C
Page 43 and 44: Table 2 Specific gas dynamic viscos
Page 47 and 48: 6.6.1 Temperature sensor menu. The
Page 49 and 50: 6.7 Outputs The Outputs sub-menu al
Page 51 and 52: Commissioning mode • Outputs •
Page 53 and 54: 6.7.2.1 Optional 4-20 mA temperatur
Page 55 and 56: 6.7.3 Pulse output This sub-menu al
Page 57 and 58: Summary of the Modbus Protocol for
Page 59 and 60: 6.8 Test menu The test sub-menu all
Page 61 and 62: 6.8.3 Testing the 4-20 mA outputs T
Page 63 and 64: Continued from page 62 Commissionin
Page 65 and 66: 6.12 Clock This allows the time and
Page 67 and 68: To page 66 Continued from page 66
Page 69 and 70: 7. Fault finding WARNING: Before co
Page 71 and 72: Commissioning Error messages Error
Page 73 and 74: 8. Maintenance Note: Before actioni
Page 75 and 76: 9.7 Input technical data 4-20 mA in
Page 77: 9.10 Maximum and minimum programmab
show all

M800 Gas Flow Computer - Spirax Sarco

Create successful ePaper yourself

Delete template?

Save as template?