Software Reference Manual - NetEx

Appendix C. BFX Error Messages
BFX generates a variety of messages during the course of execution. A complete list of messages with the
suggested action for each is shown below. Also shown is the severity of the message (as compared with the
MSGLVL parameter to determine if the message should be logged) and the modules that may issue the message.
The BFX messages have the following format:
BFXnnns message text
where:
BFX This indicates that this is a BFX error code.
nnn This is the error number. The BFX messages are listed in this order.
s This indicates the message severity. The following codes are used:
I informational messages
W warning messages
E error messages
S severe error messages
F fatal error messages
message text This is the message text.
The following are the messages issued by the BFX utility.
BFX001F Job Submission failed.
Severity: 15 (Fatal error)
Module: BFXTIC in program BFXTI.
Explanation: Transfer initiate was unable to submit a job to the remote host. The BFX program will
terminate.
User Response: The reason for job submission failure will be indicated in a previous message. Take
the corrective action indicated by the previous message description.
BFX002F BFX execution aborted.
Severity: 15 (Fatal error)
Module: BFXTR; BFXTIC in program BFXTI.
Explanation: The BFX program has detected a condition that makes it impossible to successfully
continue execution. Generally, this is due to a failure to connect to the matching BFX program on the
remote host. The BFX program will terminate.
User Response: The reason for the terminal failure will be indicated in previous BFX messages.
Take the corrective action indicated by the previous message description.
MAN-REF-H211-05 Appendix C: BFX Error Messages Page 91