Software Reference Manual - NetEx

BFXJSD#JBLOCK
BFXJSD#JBMOD
Default value: 800
Allowed values:
up to 65535 (64K)
This parameter specifies the default block size to be used to move the job file over the
NetEx/IP network. This value will be adjusted upwards by the BFX default record module if
it is insufficient to contain a logical record in the file. The default is 800 bytes.
Example:
Default value:
Allowed values:
BFXJSD#JBLOCK(8192)
STANDARD
any name, up to 8 characters in length
This parameter specifies the alphabetic name of the default block module to be used for submitting
the job. The default is JBMOD=STANDARD, which is a symbolic name that calls
the RBM or SBM BFX default block modules through the MDT table.
Example:
BFXJSD#JBMOD(STD1)
BFXJSD#JBPARM
Default value: ‘’ (none)
Allowed values: any character string, up to 64 bytes in length
This parameter specifies a default string of character parameters to be passed to the invoked
block module. This string, if provided, may be up to 64 characters in length. By default, a
string of all blanks is passed to the block module. The standard BFX block modules ignore
the JBPARM parameter.
Example:
BFXJSD#JBPARM(‘ABCD EFGHIJKLMNOP’)
BFXJSD#JID
Default value: BFXJS
Allowed values: any name, up to 8 characters in length
This parameter specifies the name that BFXJS is to provide to NETEX to OFFER its job
submission services. If omitted, the default is JID=BFXJS.
Example:
BFXJSD#JID(BXJST)
BFXJSD#JRMOD
Default value: STANDARD
Allowed values: any character string, up to 8 bytes in length
This parameter specifies the alphabetic name of the default record module to be used for
submitting the job. If used in a JES3 environment, specify JRMOD=JES3JS. The default is
JRMOD=STANDARD, which is a symbolic name that calls the RRM or SRM BFX default
record modules through the MDT table.
Example:
BFXJSD#JRMOD(STD1)
Page 46 Installing BFX MAN-REF-H211-05