Software Reference Manual - NetEx

BFXJSD#TIME
Default value:
Allowed values:
YES
YES NO
This parameter specifies if the messages logged to the SYSPRINT file by BFXJS will contain
a time of day timestamp in the form hh.mm.ss where hh=hours (24-hour clock),
mm=minutes, and ss=seconds. If omitted, the default is TIME=YES (a timestamp will be
generated).
Example:
BFXJSD#TIME(NO)
BFXJSD#TIMEOUT
Default value: 0
Allowed values: 0-32000
This parameter specifies the number of seconds that the BFXJS job will wait for a remote job
to arrive from a remote host. If a job does not arrive in that period of time, the BFXJS job
will terminate. If 0 is specified, the BFX job will never timeout. The default is
TIMEOUT=0.
Example:
BFXJSD#TIMEOUT(30)
BFXJSD#SOF1= through SOF6=
Default value: x
Allowed values: x
These parameters specify the text of a set of JCL statements to be executed before a remote
job submitted from a host has begun. As many SOF keywords should be provided as are
needed, up to a maximum of six. Statements should be enclosed in apostrophes.
Example:
BFXJSD#SOF1(‘//SAMPJOB JOB CLASS=A’)
BFXJSD#SOF2(‘//TEST EXEC PGM=IEFBR14’)
BFXJSD#SOF3(‘//’)
BFXJSD#EOF1 = through EOF6 =
Default value: x
Allowed values: x
These parameters specify the text of a set of JCL statements to be executed following the
submission of a job from a remote host. As many EOF keywords should be provided as are
needed, up to a maximum of 6. Statements should be enclosed in apostrophes (for example,
EOF1 ='/*EOF').
Example:
BFXJSD#EOF1(‘//SAMPJOB JOB CLASS=A’)
BFXJSD#EOF2(‘//TEST EXEC PGM=IEFBR14’)
BFXJSD#EOF3(‘//’)
Page 48 Installing BFX MAN-REF-H211-05