Software Reference Manual - NetEx

BUFLEN BUFLEV MSGLEN MSGLEV
Significance
>=0 0-14 0 0-15 Normal data transfer. If BUFLEN = 0 a zero length record
will be sent to the receiver.
0 0-14 > 0 0-15 Normal message provided. Message printed locally and
sent for printing on receiver. Rmod will be called again.
Data will be ignored.
> 0 0-14 > 0 0-15 Both message and data are provided. Data will be delivered
to receiver, followed by a message. The message
will be printed locally.
0 15 0 0-15 EOI with last record sent already. Last call to sending
module.
> 0 15 0 0-15 EOI following included record. Last call to sending module.
0 15 > 0 0-15 EOI message provided. Message is printed locally and
sent for printing on receiver. Last call to the record module.
Last call to sending module.
> 0 15 > 0 0-15 EOI message and last buffer provided. Buffer is forwarded
to the receiver. Message is printed locally and
forwarded to the receiver. Last call to sending module.
0 16 0 0-15 Abort transfer. All data provided before will be delivered
to the receiver, along with a default abort message. Receiver
will pass the abort to the receiving module.
> 0 16 0 0-15 Abort transfer after sending data. All data provided will
be delivered to the receiver, along with a default abort
message. Receiver will pass the abort to the receiving
module.
0 16 > 0 0-15 Abort transfer. All data provided before will be delivered
to the receiver, along with the provided abort message.
Receiver will pass the abort to the receiving module.
> 0 16 > 0 0-15 Abort transfer after sending data. All data provided will
be delivered to the receiver, along with the provided abort
message. Receiver will pass the abort to the receiving
module.
Table 2. Block module exit parameters
Page 64 Appendix A: User Modules MAN-REF-H211-05