GSC Sentinel-2 PDGS SRD - emits - ESA

GSC Sentinel-2 PDGS SRD
Issue 1 Revision 2 (draft) - 25.07.2010
GMES-GSEG-EOPG-RD-09-0028
page 60 of 204
S2-PDGS-SYS-685
During Commissioning Phase, the PDGS shall interface with the CNES/CST for:
The reception according to the CNES-PDGS ICD of
Image Calibration and Processing Parameters (GIPP) and MSI on-board configuration
parameters (e.g. NUC table)
System Digital Elevation Model
Global Reference Images increments
The delivery of:
Level-0 products;
Precise Orbit Determination data
Level-1 products
S2-PDGS-SYS-690
The PDGS shall update as required and publish the Sentinel-2 spacecraft(s) reference
orbit file to the FOS.
S2-PDGS-SYS-695
The PDGS shall interface the FOS in the frame of mission planning activities
to supply according to the PDGS-FOS ICD:
The Reference Orbit File
The Nominal Payload Planning File (NPPF)
The EDRS GEO pointing information
to receive according to the FOS-PDGS ICD:
The Plan Increment File (PIF) containing the NPPF confirmed activities
The satellite and FOS unavailability plans to constrain the mission plan
The SSCF defining the list of spacecraft constraints to be checked by the PDGS
S2-PDGS-SYS-700
The PDGS shall receive from the FOS the SSCF defining the list of spacecraft constraints
to be checked by the PDGS
S2-PDGS-SYS-705
The PDGS shall interface the FOS for the provision of MSI configuration parameter tables
on a need basis including:
The IPS tables (7 tables) in SPF format
The TCM-NOM and TCM-SBY tables in SPF format
The FEE table in SPF format
NUC table in OBSM format
ESA UNCLASSIFIED – For Official Use
© ESA
The copyright of this document is the property of ESA. It is supplied in confidence and shall not be reproduced, copied or
communicated to any third party without written permission from ESA.