GSC Sentinel-2 PDGS SRD - emits - ESA
GSC Sentinel-2 PDGS SRD - emits - ESA
GSC Sentinel-2 PDGS SRD - emits - ESA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GSC</strong> <strong>Sentinel</strong>-2 <strong>PDGS</strong> <strong>SRD</strong><br />
Issue 1 Revision 2 (draft) - 25.07.2010<br />
GMES-GSEG-EOPG-RD-09-0028<br />
page 76 of 204<br />
S2-<strong>PDGS</strong>-DRX-265<br />
The <strong>PDGS</strong>/DRX function shall support a reference time synchronized for its<br />
geographically distributed deployments and for required time-tagging activities (e.g.<br />
headers time-stamp, acquisition reports, etc).<br />
5.2.5 RAMS REQUIREMENTS<br />
S2-<strong>PDGS</strong>-DRX-270<br />
The <strong>PDGS</strong>/DRX function shall be designed to be reconfigured and operational in 30<br />
minutes in case of failure possibly in full or degraded mode.<br />
S2-<strong>PDGS</strong>-DRX-275<br />
The <strong>PDGS</strong>/DRX function shall provide reception capabilities with an availability of 99.7%<br />
computed over one month time window and assuming a degradation of such figure for no<br />
more than one day. The same availability figure is required for both X-band and Ka-band<br />
reception chains.<br />
S2-<strong>PDGS</strong>-DRX-280<br />
The <strong>PDGS</strong>/DRX function shall ensure that received and demodulated data, including<br />
related acquisition confidence data, is recorded and archived with an availability figure of<br />
99.7% computed over a period of 2 weeks.<br />
5.2.6 DESIGN & DEVELOPMENT REQUIREMENTS<br />
S2-<strong>PDGS</strong>-DRX-285<br />
The DRX function architecture design shall be such as to ensure that the data supply<br />
operations acquired of one spacecraft (e.g. S2A) do not impact in any manner the data<br />
acquisition and/or the data supply operations possibly carried out in parallel of another<br />
spacecraft (e.g. S2B).<br />
(This may imply in particular the separation at hardware level of the specific subsystems<br />
responsible for data storage/delivery (e.g. storage disk, network interface, interface server,<br />
etc).<br />
S2-<strong>PDGS</strong>-DRX-290<br />
It shall be possible to extend the DRX function capabilities to support additional<br />
spacecrafts by simple configuration and addition of the required hardware as necessary.<br />
<strong>ESA</strong> UNCLASSIFIED – For Official Use<br />
© <strong>ESA</strong><br />
The copyright of this document is the property of <strong>ESA</strong>. It is supplied in confidence and shall not be reproduced, copied or<br />
communicated to any third party without written permission from <strong>ESA</strong>.