NP-V80/60 Owner's Manual - Yamaha Downloads

Handy Performance Features
Adding Reverb
Reverb lets you play with a rich concert hall type
ambience. When you select a style or song the optimum
reverb type for the voice used is automatically
selected. If you want to select a different reverb type,
use the procedure described below.
1
2
3
Press the [FUNCTION] button.
Use the CATEGORY [ ] and [ ] buttons
to select “Reverb”.
“Reverb” will appear in the display for a few seconds,
and the currently selected reverb type will
be displayed.
f
Reverb
Hall2
02
r
The currently selected
reverb type
Use the dial to select a reverb type.
You can check how the selected reverb type
sounds by playing on the keyboard.
Refer to the Effect Type List in the separate Data
List for information about the available reverb
types.
Adjusting the Reverb Send Level
You can individually adjust the amount of
reverb that is applied to the main, dual, and
split voices. (See page 74).
Adding Chorus
The chorus effect creates a thick sound that is similar
to many of the same voices being played in unison.
When you select a style or song the optimum chorus
type for the voice used is automatically selected. If
you want to select a different chorus type, use the procedure
described below.
1
2
3
Press the [FUNCTION] button.
Use the CATEGORY [ ] and [ ] buttons
to select “Chorus”.
“Chorus” will appear in the display for a few seconds,
and the currently selected chorus type will
be displayed.
f
Chorus
Chorus1
1
r
The currently selected
chorus type
Use the dial to select a chorus type.
You can check how the selected chorus type
sounds by playing on the keyboard.
Refer to the Effect Type List in the separate Data
List for information about the available chorus
types.
Adjusting the Chorus Send Level
You can individually adjust the amount of chorus
that is applied to the main, dual, and split
voices. (See page 74).
Owner’s Manual 51
Reference