NP-V80/60 Owner's Manual - Yamaha Downloads

The Functions
The “Functions” provide access to a range of detailed instrument parameters for tuning,
setting the split point, and adjusting the voices and effects. Take a look at the function
list starting on the opposite page.
When you locate a function you want to set up, simply select the function’s display
name (shown to the right of the function name in the list) and adjust as required.
Selecting and Setting Functions
1
2
3
Find the function you want to set in the
list that begins on pages 74, 75.
Press the [FUNCTION] button.
StyleVol
100
Select a function.
Press the CATEGORY [ ] and [ ] buttons as
many times as necessary until the function’s display
name appears in the display.
f
r
The selected function.
Transpos
00
4
Use the dial, the [+] and [-] buttons, or
the [0]–[9] number buttons to set the
selected function as required.
In some cases the [+] button will initiate execution
of the selected function, and the [-] will cancel
the selection.
• Decrement
value by 1.
•NO
Press simultaneously
to recall the
default setting.
Direct
numeric entry.
• Increment
value by 1.
• YES
Some Function settings are stored in memory as soon
as they are changed. See “The Backup Parameters” on
page 50 for information on the function settings that
are stored on the instrument.
To restore all initial factor default settings perform the
“Backup Clear” procedure described in the “Initialization”
section on page 50.
Owner’s Manual 73
Reference