NP-V80/60 Owner's Manual - Yamaha Downloads

Reference
76
Saving and Loading Data (NP-V80 Only)
USB flash memory is a memory medium used for storing data. When a USB flash memory
is inserted in this instrument’s USB TO DEVICE terminal, registered settings can be
saved from or loaded into the instrument. In this section we’ll look at the procedures
for setting up and formatting USB flash memory devices, as well as for saving and
loading data to and from them. Before using a USB device, read through the “Precautions
when using the USB TO DEVICE terminal” section on page 77.
File Control Functions
1
2
Connect a USB flash memory to the
USB TO DEVICE terminal, being careful
to insert it with the proper orientation.
Wait for confirmation that the USB flash
memory has been properly mounted.
Mounting
Mounted
Normal
display
Owner’s Manual
LiveGPno
Usb
001
Usb
Usb
001
(Flashing)
(Displayed for 2
seconds)
(Measure number, etc.)
3
The file control function mode.
Press and hold the [FUNCTION] button until the
display changes. When the display changes you
will be able to access the file control functions.
If the file control functions are accessed while an
unformatted USB flash memory is connected to
the instrument, the “Format” function will automatically
be selected.
Use the category [ ] and [ ] buttons to select
one of the file control functions listed below.
f
Load STY
r
Hold for more
than 3 seconds
File control function Reference page
Format 78
Saving User Files 79
Saving User Songs as SMF Files 80
Loading User Files 81
Loading Style Files 81
Deleting User Files 82
Deleting SMF Song Files 82
Exit 83
To exit from the file control function mode press
the [VOICE], [STYLE], [SONG], [FUNCTION],
or [GRAND PIANO] button. You can also exit
from the file control function mode by selecting
“EXIT” from the menu and pressing the [0] button
(page 83).