QLogic OFED+ Host Software User Guide, Rev. B

D–SRP Configuration
QLogic SRP Configuration
1. By the port GUID of the IOC, or
2. By the IOC profile string that is created by the VIO device (i.e., a string
containing the chassis GUID, the slot number and the IOC number). FVIC
creates the device in this manner, other devices have their own naming
method.
To specify the host InfiniBand port to use, the user can either specify the port
GUID of the local InfiniBand port, or simply use the index numbers of the cards
and the ports on the cards. Cards are numbered from 0 on up, based on the order
they occur in the PCI bus. Ports are numbered in the same way, from first to last.
To see which cards and ports are available for use, type the following command:
ib_qlgc_srp_query
The system returns input similar to the following:
D-4 D000046-005 B