QLogic OFED+ Host Software User Guide, Rev. B

D–SRP Configuration
OFED SRP Configuration
4. Find the result that corresponds to the target you want, and echo it into the
add_target file:
echo
"id_ext=21000001ff040bf6,ioc_guid=21000001ff040bf6,dgid=fe800
0000000000021000001ff040bf6,pkey=ffff,service_id=f60b04ff0100
0021,initiator_ext=0000000000000001" >
/sys/class/infiniband_srp/srp-ipath0-1/add_target
5. Look for the newly created devices in the /proc/partitions file. The file
will look similar to this example (the partition names may vary):
# cat /proc/partitions
major minor #blocks name
8 64 142325760 sde
8 65 142319834 sde1
8 80 71162880 sdf
8 81 71159917 sdf1
8 96 20480 sdg
8 97 20479 sdg1
6. Create a mount point (as root) where you will mount the SRP device. For
example:
mkdir /mnt/targetname
mount /dev/sde1 /mnt/targetname
NOTE:
Use sde1 rather than sde. See the mount(8) man page for more
information on creating mount points.
D000046-005 B D-25