QLogic OFED+ Host Software User Guide, Rev. B

3–TrueScale Cluster Setup and Administration
Installed Layout
Installed Layout
This section describes the default installed layout for the QLogic OFED+ software
and QLogic-supplied MPIs.
The QLogic MPI is installed in:
/usr/mpi/qlogic
The shared libraries are installed in:
/usr/mpi/qlogic/lib for 32-bit applications
/usr/mpi/qlogic/lib64 for 64-bit applications
MPI include files are in:
/usr/mpi/qlogic/cdinclude
MPI programming examples and the source for several MPI benchmarks are in:
/usr/mpi/qlogic/share/mpich/examples
NOTE:
If QLogic MPI is installed in an alternate location, the argument passed to
--prefix (Your location) replaces the default /usr/mpi/qlogic
prefix. QLogic MPI binaries, documentation, and libraries are installed under
that prefix. However, a few configuration files are installed in /etc
regardless of the desired --prefix.
If you have installed the software into an alternate location, the
$MPICH_ROOT environment variable needs to match --prefix.
QLogic OFED+ utility programs, are installed in:
/usr/bin
Documentation is found in:
/usr/share/man
/usr/share/doc/infinipath
/usr/share/doc/mpich-infinipath
License information is found only in usr/share/doc/infinipath. QLogic
OFED+ Host Software user documentation can be found on the QLogic web site
on the software download page for your distribution.
Configuration files are found in:
/etc/sysconfig
Init scripts are found in:
/etc/init.d
3-2 D000046-005 B