QLogic OFED+ Host Software User Guide, Rev. B

D–SRP Configuration
QLogic SRP Configuration
NOTE:
The default configuration generated by ib_qlgc_srp_build_cfg for OFED
is similar to the one generated for the QuickSilver host stack with the
following differences:
• For OFED, the configuration automatically includes IOClass
• For OFED, the configuration automatically includes SID
• For OFED, the configuration provides information on targetPortGid
instead of targetPortGuid
• For OFED, the configuration automatically includes
targetIOCProfileIdString.
Specifying an SRP Initiator Port of a Session by Card and
Port Indexes
The following example specifies a session by card and port indexes. If the system
contains only one adapter, use this method.
session
begin
#Specifies the near side by card index
card: 0 #Specifies first HCA
port: 1 #Specifies first port
targetIOCGuid: 0x00066013800016C
end
Specifying an SRP Initiator Port of Session by Port GUID
The following example specifies a session by port GUID. If the system contains
more than one adapter, use this method.
session
begin
portGuid: 0x00066A00a00001a2 #Specifies port by its GUID
targetIOCGuid: 0x00066A013800016C
end
NOTE:
When using this method, if the port GUIDs are changed, they must also be
changed in the configuration file.
D-8 D000046-005 B