QLogic OFED+ Host Software User Guide, Rev. B

I–Useful Programs and Files
Summary of Configuration Files
Table I-6. Status—Other Files (Continued)
File Name
unit
status
Contents
A unique number for each card or chip in a system.
The numeric version of the status_str file, described in Table I-5.
version
You can check the version of the installed InfiniPath software by looking in:
/sys/class/infiniband/qib0/device/driver/version
QLogic-built drivers have contents similar to:
$Id: QLogic OFED Release 1.4.2$ $Date: Fri Feb 27 16:14:31 PST 2009
$
Non-QLogic-built drivers (in this case kernel.org) have contents similar to:
$Id: QLogic kernel.org driver $
Summary of Configuration Files
Table I-7 contains descriptions of the configuration and configuration template
files used by the InfiniPath and OpenFabrics software.
Table I-7. Configuration Files
Configuration File Name
/etc/infiniband/qlgc_vnic.cfg
/etc/modprobe.conf
Description
VirtualNIC configuration file. Create this file
after running ib_qlgc_vnic_query to
get the information you need. This file was
named /etc/infiniband/qlogic_vnic.cfg
or
/etc/sysconfig/ics_inic.cfg in
previous releases. See the sample file
qlgc_vnic.cfg.sample (described
later) to see how it should be set up.
Specifies options for modules when added
or removed by the modprobe command.
Also used for creating aliases. The PAT
write-combing option is set here.
For Red Hat systems.
D000046-005 B I-21