WorkSpace On-Demand 2.0 Feature for Windows ... - IBM Redbooks
WorkSpace On-Demand 2.0 Feature for Windows ... - IBM Redbooks
WorkSpace On-Demand 2.0 Feature for Windows ... - IBM Redbooks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
client definition. If /DHCP:Y is specified, the<br />
value <strong>for</strong> /IP is ignored.<br />
/MAC{:AdapterAddress} Specifies the MAC address of the client. The<br />
MAC address consists of twelve hexadecimal<br />
characters. This parameter is required when<br />
creating a client definition.<br />
/NIP{:NameServerTCPIPAddress[,NameServerTCPIPAddress]}<br />
Specifies the TCP/IP addresses of TCP domain<br />
servers (nameservers). Up to three TCP/IP<br />
addresses, separated by commas, may be<br />
specified with the /NIP parameter. If /DHCP:Y is<br />
specified, the value <strong>for</strong> /NIP is ignored.<br />
/OPTIONS Displays detailed in<strong>for</strong>mation on command<br />
parameters. /OPTIONS should not be specified<br />
with any other parameters.<br />
/PARTITION{:PrimaryPartitionSize | ALL}<br />
Specifies the size of the primary disk partition on<br />
the client. The default value is 250 MB. The<br />
maximum value is 2 GB. The minimum value <strong>for</strong><br />
all client types is 250 MB. The value may be<br />
specified in terms of megabytes (MB) or<br />
gigabytes (GB). If no size designation is<br />
specified, MB is assumed. Specify<br />
/PARTITION:ALL if you want the entire disk to be<br />
the client's primary disk partition.<br />
/PRINTER{:"PrinterName,DriverModel,Port" |PrinterName=delete}<br />
Specifies a printer used by a Microsoft <strong>Windows</strong><br />
95 or Microsoft <strong>Windows</strong> 98 client. This<br />
parameter is not valid <strong>for</strong> Microsoft <strong>Windows</strong> NT<br />
clients. PrinterName specifies the queue name<br />
of the printer as it is known on the client. This<br />
value cannot be longer than 31 bytes and<br />
cannot contain the following characters: \,;=-<br />
DriverModel indicates the device driver<br />
associated with the printer. Port indicates one of<br />
the following: the port (LPT1-LPT9) to which the<br />
printer is physically attached if PrinterName<br />
specifies a local printer or a UNC name<br />
indicating a shared network printer. To<br />
disassociate a printer with a client definition,<br />
specify the name of the printer followed by<br />
Workstation customization and administration 133