WorkSpace On-Demand 2.0 Feature for Windows ... - IBM Redbooks

The Workstation Record
The workstation record in the RPL.MAP file contains 15 fields (1 through 9
and A through F). Fields are delimited by spaces. An empty field must contain
a tilde (~) character that serves as a place holder. Table 1 describes each of
the fields in the workstation record.
Table 1. The RPL.MAP file - Workstation record field descriptions
Field Name/Value Description
1 100FFFFFFFFF Unique, burned-in 12-character adapter address of
the primary network adapter in the client workstation
to which this entry refers. This field can also contain
question mark (?) characters for DOS Remote IPL
records that are used as wildcards. Do not use these
wildcard characters in OS/2 or WorkSpace
On-Demand Remote IPL records.
2 WCF1 WorkstationmachineID.Canbeupto15characters
in length.
3 - Not used. Must contain a tilde character.
4 W32DOSSB For DOS Remote IPL, this is the name of the diskette
image used to IPL the client (an extension of .IMG is
assumed). This field is limited to eight characters in
length for a DOS client.
28 WorkSpace On-Demand 2.0 Feature for Windows Clients
For WorkSpace On-Demand, this is the name of the
FIT file to be used when booting the client. The path
name is relative to the RPLDIR path (which is typically
\IBMLAN\RPL). An extension of .FIT is assumed.
5 GA_SRV For DOS Remote IPL, this field contains the name of
the Remote IPL server where the diskette image file
and other files for the DOS workstation are stored.
This name is limited to 15 characters.
6 Z or GA_DOM For DOS Remote IPL, this is the name of the domain.
For OS/2 and WorkSpace On-Demand clients, this is
the drive letter for the RIPL boot drive. Use a letter
from C through Z. Do not use a local hard disk drive.