NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
4-3-6-4. 802.1x Miscellaneous Configuration<br />
Miscellaneous 802.1x settings such as shown in the 802.1x Misc.<br />
Configuration page are editable as follows:<br />
1. Press .<br />
2. Quiet Period: Used to define period of time during which it will not<br />
attempt to acquire a supplicant (Default time is 60 seconds).<br />
3. Tx Period: Used to determine when an EAPOL PDU is to be<br />
transmitted (Default value is 30 seconds).<br />
4. Supplicant Timeout: Used to determine timeout conditions in the<br />
exchange between the supplicant and authentication server<br />
(Default value is 30 seconds).<br />
5. Server Timeout: Used to determine timeout conditions in the<br />
exchange between the authenticator and authentication server<br />
(Default value is 30 seconds).<br />
6. ReAuthMax: Used to determine the number of re-authentication<br />
attempts that are permitted before the specific port becomes<br />
unauthorized (Default value is 2 times).<br />
7. Reauth Period: Used to determine a nonzero number of seconds<br />
between periodic re-authentication of the supplications (Default<br />
value is 3600 seconds).<br />
8. Press Ctrl+A go back action menu line.<br />
9. Press to save configured value.<br />
96