NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
Broadcast Storm Filter: To configure broadcast storm control, enable it<br />
and set the upper threshold for individual ports. The threshold is the<br />
percentage of the port's total bandwidth used by broadcast traffic. When<br />
broadcast traffic for a port rises above this threshold, broadcast storm<br />
control will activate. The valid threshold values are 5%, 10%, 15%, 20%,<br />
25% and OFF.<br />
Priority Queue Service settings:<br />
First Come First Service (FCFS): The sequence of packets sent<br />
depends on the order they arrive.<br />
All High before Low (AHBL): The high priority packets are sent before<br />
low priority packets.<br />
Weighted Round Robin (WRR): Select the preferred ratio of high and<br />
low priority packets sent by the <strong>Switch</strong> in its priority queue. These options<br />
represent the number of high priority packets sent before one low priority<br />
packet is sent. For example, 5 High: 2 Low, means that the <strong>Switch</strong> sends<br />
5 high priority packets before sending 2 low priority packet.<br />
QoS Policy - Priority Levels: 0~7 QoS levels can be assigned to<br />
designated high or low priority.<br />
Collisions Retry Forever: Disable – In half-duplex, if collision occurs,<br />
12
Change language