NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
2-6-7-3. State Activity<br />
Active (select): The port automatically sends LACP packets.<br />
Passive (no select): The port does not automatically send LACP packets,<br />
and respond only if it receives LACP packets from another networking<br />
device.<br />
A link having either two active LACP ports or one active port can perform<br />
dynamic LACP trunking. A link has two passive LACP ports will not<br />
perform dynamic LACP trunking because both ports are waiting for LACP<br />
packet from another networking device.<br />
If the switch is set to be an active LACP’s actor, and ports are selected for<br />
trunking (from the Port Trunking > Aggregator Settings, shown in the<br />
previous section) then all ports selected to participate in trunking that<br />
port’s LACP State will be automatically set to Active in the screen below.<br />
The LACP State Activity may be inactivated by un-checking the status<br />
box next to the port.<br />
20