NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4-4. Status and Counters<br />
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
You can press the Tab or Backspace key to access an item, and press<br />
Enter key to select item.<br />
4-4-1. Port Status<br />
The Status and Counters page displays the status of each port.<br />
Link Status:<br />
InRate:<br />
OutRate:<br />
Enabled:<br />
Auto:<br />
Spd/Dpx:<br />
FlowCtrl:<br />
Displays whether the port is linked or not linked.<br />
Displays the input rate control (100K/unit) setting value.<br />
Displays the output rate control (100K/unit) setting value.<br />
Shows whether the port is enabled or disabled.<br />
Depending on the user’s setting a “Yes“ or “No” status<br />
will be displayed respectively. If the port is not linked its<br />
status be treated as “No”.<br />
Displays the port NWay link mode: Auto, NWay_Force,<br />
Force.<br />
Displays the port speed and duplex.<br />
In auto / NWay force mode, the display for the flow<br />
control status is enabled or disabled on auto-negotiation.<br />
In force mode, the display for flow control status is<br />
97