NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
3. Low Queue Max Delay Time: To set the time that low priority<br />
packets are queued in the <strong>Switch</strong>. Default Max Delay Time is 255ms.<br />
The valid range is 1~255 ms.<br />
NOTE: Make sure that the “Max bridge transit delay bound control” is enabled<br />
before the “Low Queue Delay Bound” is enabled because the former<br />
must be activated before the latter in order for Bridge Transit Delay<br />
Bound to function properly.<br />
4-2-6-4. Port Security<br />
A port in security mode will be “locked” and does not permit address<br />
learning. Only incoming packets with Static Media <strong>Access</strong> Control (SMAC)<br />
already existing in the address table can be forwarded normally. The user<br />
can disable the port from learning any new MAC addresses, then use the<br />
static MAC address screen to define a list of MAC addresses that can use<br />
the secured port.<br />
66
Change language