NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
1. Member: The port is a member of the current VLAN.<br />
2. NO: The port is NOT a member of the current<br />
VLAN.<br />
5. Press Ctrl+A to go back to the action menu line.<br />
6. Select to save all configure values.<br />
NOTE:<br />
If the trunk groups exists (e.g. TRK1, TRK2…) you can see it sorted in the<br />
list below the ports. Remember, trunks can be assigned to members of<br />
a VLAN just as ports can.<br />
Create an 802.1q (tag-based) VLAN<br />
To create an 802.1q VLAN and add tagged /untagged member ports to it,<br />
follow the procedure below.<br />
1. Select .<br />
2. VLAN Name: Type a name for the new VLAN.<br />
3. VLAN ID: Type a VID (between 2~4094). The default is 1. There are<br />
256 VLAN groups provided for configuration. Each port can join more<br />
than one, (up to 256) tagged VLAN groups.<br />
60