NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
Create a trunk group<br />
1. Select on the “actions” menu<br />
2. The numbers 1-7 running down the left side of the page<br />
represent the maximum allowable (7) trunk groups. Use the<br />
Arrow/TAB/Backspace keys to navigate through these fields.<br />
Press the key to add a port to a trunk group<br />
(represented by a ‘v’).<br />
3. Below the port group identifiers are TRK1~TRK7,<br />
representing the maximum (7) trunk groups, and next to each<br />
is a status indicator.<br />
Static – A standard port-based (non-LACP) trunk.<br />
LACP - Trunking with Link Aggregation Control Protocol.<br />
Disable - The trunk group is disabled.<br />
Set each trunk to; Static, LACP, or disabled as desired.<br />
4. Press Ctrl+A to return to the action menu line. Select <br />
to save all configured values.<br />
NOTE: Since all ports in the same static trunk group behave as a single port,<br />
changes to the Port Configurations for a trunk will apply to all members of<br />
the trunk simultaneously.<br />
56