NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
Forward Delay time You can change forward delay time, The number<br />
of seconds a port waits before changing from its<br />
Spanning Tree Protocol learning and listening<br />
states to the forwarding status. Enter a time in<br />
seconds from 4 to 30.<br />
2. From the Spanning Tree Configuration Menu, click PerPort<br />
Configuration to configure STP parameters on each port, click on<br />
the “Apply” button to set it.<br />
Parameter<br />
Port Priority<br />
Path Cost<br />
Description<br />
You can make the port more or less likely in becoming<br />
the root port. The range is between 0-255. Its default<br />
setting is 128. The lowest number has the highest<br />
priority.<br />
Specifies the path cost of the port. The <strong>Switch</strong> uses this<br />
to determine which port are the forwarding ports. The<br />
lowest numbers assigned are the forwarding ports. The<br />
range is between 1 and 65535 and the default value<br />
base on IEEE802.1d are:<br />
10Mb/s = 50-600 100Mb/s = 10-60 1000Mb/s = 3-10<br />
36