NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
If 802.1q VLAN is set, you can set PVID, ingress filtering 1 and ingress<br />
filtering 2 on the VLAN Support Configuration page.<br />
1. PVID (Port VID : 1~4095): Select the PVID. Each port allows the user<br />
to set one PVID, the range is 1~4095, the default PVID is 1. Multiple<br />
ports can share the same PVID, but in the same switch all the PVIDs<br />
of the switch’s ports must belong to the same 256-number segment,<br />
for example 1~255 or 256~511 or …3840~4095.<br />
2. NonMember Pkt: This matches Ingress Filtering Rule 1 in<br />
web-based management (p.33).<br />
Either forward only packets with a VID that matches this port’s<br />
58
Change language