NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
NSH-566 Modularized 24 (100Base-FX) + 2G Access Switch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4-2-5. VLAN Configuration<br />
<strong>Modularized</strong> <strong>24</strong>+<strong>2G</strong> <strong>Switch</strong><br />
Use the VLAN Configuration page (shown below) to set port-based VLAN<br />
or 802.1q VLAN or to deactivate the VLAN function. There are a few<br />
configuration examples in Appendix B for your reference.<br />
NOTE: Each time the VLANs are modified, the <strong>Switch</strong> should be restarted to assure<br />
that the new configurations take affect.<br />
There are three types to select:<br />
a. Disable (VLAN)<br />
b. Port-based<br />
c. 802.1q (Tag-based)<br />
To enable or disable VLAN Support, enter the VLAN Support<br />
Configuration screen shown below. The default configuration VLAN Mode<br />
for the <strong>Switch</strong> is “Disabled”.<br />
57
Change language