Flo-Ware Manual - Hachflow
Flo-Ware Manual - Hachflow
Flo-Ware Manual - Hachflow
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operation<br />
3.4.3 Print a chart<br />
A paper copy of a chart can be made from a local or network printer.<br />
3.5 Reports<br />
1. From the View panel, select Chart.<br />
2. Click the PRINT button. The Print window opens.<br />
3. Select the printer, the number of pages to be printed and make any necessary<br />
changes to the properties. Click OK. The chart is sent to the printer.<br />
Reports of raw data can be shown for different time intervals or as a summary of<br />
maximum, minimum, average and total values.<br />
3.5.1 Make a report<br />
Use the Text Report toolbar to make a text report.<br />
1. Open a data or project file.<br />
2. From the View panel, select Text Reports.<br />
3. Select a report type from the Available Reports drop-down list on the Text Report<br />
toolbar. The report is shown in the view window. Use the page navigator on the main<br />
toolbar to view additional pages.<br />
Note: After a report type is selected, it is available in the Installed Reports list.<br />
4. To add or remove a theme (column), go to the Themes panel and select or deselect a<br />
theme.<br />
5. To change the order of themes, go to the Themes panel and click and drag the theme<br />
name up or down.<br />
6. To change the date range:<br />
a. Go to the Report Settings panel.<br />
b. Select the check box next to Custom Data Span. The start and end dates and<br />
times are shown.<br />
c. Click on the start or the end date and time. The Date/Time window opens.<br />
d. Select a new date and time and click OK. The report will update and show the<br />
new date and time.<br />
3.5.2 Print a report<br />
A paper copy of a report can be made from a local or network printer.<br />
1. Open a text report.<br />
3.6 Data reconstruction<br />
2. Click the PRINT button. The Print window opens.<br />
3. Select the printer, the number of pages to be printed and make any necessary<br />
changes to the properties. Click OK. The report is sent to the printer.<br />
The data reconstruction workspace gives the user the flexibility to analyze data and, if<br />
necessary, repair or reconstruct the data. The example in this section describes the<br />
removal of an error in the velocity theme from a flow meter.<br />
16