ER-A520/ER-A530 INSTRUCTION MANUAL
ER-A520/ER-A530 INSTRUCTION MANUAL
ER-A520/ER-A530 INSTRUCTION MANUAL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Item label<br />
PGM 2<br />
2214<br />
2064<br />
(Dynamic UPC file)<br />
You can program a maximum of 16 characters (item label) for each PLU/UPC.<br />
Select the characters you want to program, referring to section “2 How to program alphanumeric characters” in<br />
chapter “PRIOR TO PROGRAMMING”.<br />
Procedure<br />
2214<br />
PLU code<br />
Character keys<br />
. @ @ t Ç<br />
2064 (max. 5 digits)<br />
(max. 16 digits)<br />
UPC code<br />
(6 to 13 digits)<br />
To program any PLU/UPC<br />
Ä<br />
To keep the current setting<br />
*To program for price levels 2 thru 6<br />
(only when price shift function is allowed)<br />
To program for the following PLU/UPC<br />
* In case that price shift function is allowed, the register prompts to enter an item level for the following level by<br />
displaying "P2" thru "P6" on the display, and when an item level of level 6 is entered, the register goes to the<br />
status for programming the following PLU/UPC. You must enter texts for all price levels.<br />
In case that single price entry is allowed for a PLU/UPC code, the register goes to the status for programming<br />
the following PLU/UPC.<br />
Example<br />
Programming “MILK_1, MILK_2, MILK_3, MILK_4, MILK_5, MILK_6” for price levels 1 thru 6<br />
of PLU1<br />
Key operation<br />
2214 .@<br />
1 @ MILK_1 t<br />
MILK_2 t<br />
MILK_3 t<br />
MILK_4 t<br />
MILK_5 t<br />
MILK_6 t<br />
Ç<br />
Print<br />
118
Change language