ER-A520/ER-A530 INSTRUCTION MANUAL
ER-A520/ER-A530 INSTRUCTION MANUAL
ER-A520/ER-A530 INSTRUCTION MANUAL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Link PLU/UPC link<br />
Procedure<br />
PGM 2<br />
2220<br />
Ä<br />
To program any PLU/UPC<br />
Cancellation<br />
2220 PLU code<br />
Linked PLU code<br />
. @ @ t Ç<br />
(max. 5 digits)<br />
(max. 5 digits)<br />
UPC code<br />
(6 to 13 digits)<br />
t<br />
t<br />
To repeat up to 5 times<br />
To program for the following PLU/UPC<br />
Note<br />
PLU/UPC codes must have already been defined.<br />
You can program a maximum of 15 link PLUs/UPCs. A link PLU/UPC can be linked to a maximum<br />
of 5 PLUs.<br />
Example<br />
Programming so that PLU 25, 26 and 27 are linked to PLU 21<br />
Key operation<br />
Print<br />
2220 .@<br />
21 @ 25 t<br />
26 t<br />
27 t<br />
Ç<br />
Linked<br />
PLUs<br />
Programming of PLU levels and direct PLU keys<br />
PGM 2 2219<br />
You can assign PLU codes to fixed keys in each PLU level and use those keys as direct PLU key.<br />
For assigning a PLU level, press the l, ¬, Ò, L4 or L5 key or enter level number and press the ä key.<br />
For example, if you want to assign PLU level 1 and key no. 1 to a PLU code, press the l key and enter 1<br />
before entering the PLU code.<br />
For key no. position, refer to section “3 Standard key number layout” in chapter “KEYBOARD”.<br />
Procedure<br />
To program any key no.<br />
Level no.<br />
(1-5) ä<br />
l<br />
Cancellation<br />
2219 Key no.<br />
PLU code<br />
. @ ¬ @ t Ç<br />
(max. 3 digits)<br />
(max. 5 digits)<br />
Ò<br />
To program the next sequential key no.<br />
L4<br />
L5<br />
130<br />
Note<br />
To keep the current level<br />
• PLU codes must have already been defined.<br />
• The key number placement is determined by your local Authorized SHARP Dealer.
Change language