H.264 Network DVR User Manual

More documents

Recommendations

Info

BEFORE USING THIS DVR 1.3 Rear Panel 1) 75Ω / HI-IMPEDANCE (For Selected Models Only) When using Loop function, please switch to HI-IMPEDANCE. When you don’t use Loop function, please switch to 75Ω. 2) VIDEO IN (1 ~ 16 / 1 ~ 8 / 1 ~ 4): Connect to the video connector of a camera. VIDEO LOOP (1 ~ 16 / 1 ~ 8): Video output connector. (For Selected Models Only) Note: The DVR will automatically detect the video system of the camera, please make sure that the cameras are properly connected to the DVR and power-supplied before the DVR is turned on. 3) AUDIO IN (1 ~ 4) Connect to the audio connector of a camera if the camera supports audio recording. Note: To make a video backup with audio, make sure the camera which supports the audio function is connected to the video-in channel and audio-in channel. For example, the audio data from audio CH1 will be recorded with the video data from video CH1. 4) AUDIO OUT Connect to a speaker with 1 mono audio output. Note: To know how many audio outputs your DVR supports, please refer to its specifications. 5) MONITOR Connect to a CRT monitor for video output. Note: When both MONITOR and VGA are connected, press the left key ◄ on the DVR front panel during DVR power-on to force the video output via MONITOR. For details, please refer to “4.5 Video Output Switch” at page 17. 6) CALL (For Selected Models Only) Connect to a monitor specific for sequence display. 7) VGA Connect to a LCD monitor directly. Note: When both MONITOR and VGA are connected, press the right key ► on the DVR front panel during DVR power-on to force the video output via VGA. For details, please refer to “4.5 Video Output Switch” at page 17. 8) IR (For Selected Models Only) Connect the IR receiver extension line for remote control. 9) EXTERNAL I/O This port is used to connect external devices (such as speed dome cameras or external alarm, etc). 3
BEFORE USING THIS DVR For detailed I/O port PIN configuration, please refer to “APPENDIX 6 PIN CONFIGURATION” at page 53. 10) LAN Connect to Internet by LAN cable. 11) DC 19V Connect to the supplied adapter. 12) Power Switch Switch to “” to turn on the power, and “” to turn off the power. 4
Page 1 and 2: 340Z H.264 Network DVR User Manual
Page 3 and 4: MPEG4 Licensing THIS PRODUCT IS LIC
Page 5 and 6: 5.3.2 Detection Timer..............
Page 7: BEFORE USING THIS DVR 6) PLAY Press
Page 11 and 12: CONNECTION AND SETUP 2-2 To install
Page 13 and 14: CONNECTION AND SETUP 3) Connecting
Page 15 and 16: CONNECTION AND SETUP 2.4 Date and T
Page 17 and 18: GUI DISPLAY WITH USB MOUSE CONTROL
Page 19 and 20: GUI DISPLAY WITH USB MOUSE CONTROL
Page 21 and 22: BASIC OPERATION 4.3 Playback Click
Page 23 and 24: BASIC OPERATION The default video o
Page 25 and 26: 3) IMAGE PER SECOND Select the imag
Page 27 and 28: FREQUENTLY-USED FUNCTIONS 5.3.2 Det
Page 29 and 30: FREQUENTLY-USED FUNCTIONS Make sure
Page 31 and 32: FREQUENTLY-USED FUNCTIONS SYSTEM TO
Page 33 and 34: FREQUENTLY-USED FUNCTIONS 3) NETWOR
Page 35 and 36: REMOTE OPERATION control panel. d)
Page 37 and 38: REMOTE OPERATION Full Function Vers
Page 39 and 40: REMOTE OPERATION If “Manual” is
Page 41 and 42: REMOTE OPERATION 6.1.4. E-Map Video
Page 43 and 44: REMOTE OPERATION STEP3: When the E-
Page 45 and 46: ‣ For Building E-Map Group Right-
Page 47 and 48: REMOTE OPERATION NO. Function Descr
Page 49 and 50: APPENDIX 1 SPECIFICATIONS APPENDIX
Page 51 and 52: APPENDIX 1 SPECIFICATIONS ‣ For 4
Page 53 and 54: APPENDIX 2 COMPATIBLE USB FLASH DRI
Page 55 and 56: APPENDIX 4 MAIN MENU STRUCTURE APPE
Page 57 and 58: APPENDIX 5 DVR BATTERY REPLACEMENT
Page 59 and 60:
For 8CH Model APPENDIX 6 PIN CONFIG
Page 61:
APPENDIX 7 DVD WRITER INSTALLATION
show all

H.264 Network DVR User Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?