Gears, Chains, and Sprockets - VEX Robotics

5. For Hole Diameter, enter 0.171.2. Click Rectangular Pattern.3. In the browser, select the three extrudedfeatures and the hole feature.6. For Termination, select Through Allfrom the list.4. Click the Direction 1 Path selection button.7. Click OK.5. In the browser, expand the Origin folder.Select X Axis.Create a Feature PatternIn this section of the exercise, you create a featurepattern of the extruded and hole features.1. On the ViewCube, click Home.6. Select the Midplane check box to turn it on.38■Unit 6: Gears, Chains, and Sprockets