BSL PRO Software Guide - Biopac

Acquisition Functions 127The option all sequences means that each configured sound sequence (regardless of number) will be outputtedwithin the same segment. If "Once" is selected in the "Output entire pulse sequence" option, a configured sequencewill be heard one time only. If "Continuously" is selected, the first Sound Sequence will be repeated after the lastone has completed, looping the pattern repeatedly until the recording is stopped.The option each sequence means that each sound sequence will be outputted on a segment-by segment-basis only.For example, if one Sound Sequence is configured, it will only be heard during the first recording segment, but notduring the second recording segment). If two Sound Sequences are set up, the first one will be heard during the firstsegment and the second one during the following segment.. If no additional Sound Sequences have been configured,nothing will be heard during the third segments and beyond. (Exception: If "Save Once" acquisition mode is used,the Sound Sequence will be repeated when the recording is overwritten during subsequent passes).The following terms are used in the Output Control panels, Preferences, and guidelines for Pulses,Stimulator – BSLSTM and Low Voltage Stimulator.Delay before first PulseInitial delay from start of acquisition to start of first pulse.