BSL PRO Software Guide - Biopac

245Horizontal Axis...This option generates a “Set Horizontal Axis format” dialog withtwo time format options.Time (ss.sss) is the default.Time (HH:MM:SS) displays asand rounds as necessary to fit this format.Show...When Show is selected from the Display menu, a submenu appears that allows youto control a number of options related to how data is displayed and what additionalinformation is displayed in the graph window.To enable an item, scroll to select it from the Show submenu.A bullet (•) or check mark ( ) appears next to the menu item when it is enabled.SHOW Option Toolbar / Shortcut ExplanationChannel numbersActivates the channel box display above the graph window.See page 749.Chart Activates the Chart display mode. See page 739.Dot plotDot sizeClick the right mouse buttonand scroll to choose Dot plot‣ Hold the Ctrl keywhen you select toapply to all channels.Click the right mouse buttonand scroll to choose Dot sizeAllows you to view data in a “dot” format. The software willcreate user-defined, discrete points that map out the selectedwaveform.This is often useful for demonstrating the concept of discretedigital sampling by dividing the waveform up into data points or“dots.”Use to specify how largeeach dot will be for DotPlot. Each dot is measuredby the number of monitorpixels it occupies. If youselect a large number (like21 pixels), then thewaveform will look like aseries of large dots.GridSuperimposes a set of horizontal and vertical lines on the graphwindow that correspond to horizontal and vertical scale divisions.Grids are a useful visual aid to help with measurements and when