BSL PRO Software Guide - Biopac

274 Part EAnalog Preset NameChannel LabelApplicable Calc. PresetsGainXHardwareFiltersAC or DC.05 or .5 HP1K or 5K LPIIRFiltersType,Freq., QScaling(Mapping)UnitslabelRecommendedCalibration &Sample Rate(Samples/sec).707Monitor Audio Output (MP45 only, CH2only)200 DC None100-10 mV to -1010 mV to 10mV.707MP100/150 Interface (BSLCBL14)MP100/150 Interface10 DC None -1000 mV to -101000 mV to10VoltsNerve Response (BSLCBL3, 4, 9)Nerve ResponseNerve Conduction Recording Cable(DSUB 9M to 3x Banana Plugs) Input Range (MP30) = +-700 mVInput Range (MP36/35) = +-10 Volts2,0001,000AC.5 HP, 5KLPNone -1000 uV to -101000 uV to10-1 mV to -101 mV to 10mV 100,000Nerve Response (BSLCBL8)Nerve ResponseHigh Impedance CableO2 Expired (GASSYS2)200 DCBP 0 mV to 0% O2O2 ExpiredGAS - O 2 (Used on GAS-System2)1K LP20.64 mV to20.93pH (BSL-TCI21)pH200 DCBP 0 mV to 7pHpH Probe (Generic, BNC style)1K LP35 mV to 14use with RXPROBE01)PneumogramPneumogram transducerDC0 mV to 0SS67L = SS41L + RX110 + tubing 5001K LPBP6.55 mV to10cm H2OPressure (+- 2.5 cm H2O)0 mV to 0PressureSS40L Diff. Pressure Transducer +-2.5cm H201,000 DC1K LPBP1.6375 mV to1cm H2OPressure (+- 12.5 cm H2O)Pressure500 DCBP 0 mV to 0cm H2OSS41L Diff. Pressure Transducer +-12.5cm H201K LP6.55 mV to10Pressure (+- 25 cm H2O)Pressure500 DCBP 0 mV to 0cm H2OSS42L Diff. Pressure Transducer +-25cm H201K LP3.27 mV to10Psychological ResponsePsych. Response Indicator 200 DC BP 0 mV to 0 ResponsVisit the online support center at www.biopac.com