BSL PRO Software Guide - Biopac

268 Part EAnalog Preset NameChannel LabelApplicable Calc. PresetsGainXHardwareFiltersAC or DC.05 or .5 HP1K or 5K LPIIRFiltersType,Freq., QScaling(Mapping)UnitslabelRecommendedCalibration &Sample Rate(Samples/sec)BNC (SS9L, -10 to +10 Volts max.BNC Adapter (for MP30)Use when connecting up to externaldevices using the BIOPAC SS9L BNCadapter. Voltage amplitudes should begreater than +- 1 Volt, and less than +-10 Volts.1,000 DC5K LPNone -1 mV to -11 mV to 1VoltsMin. SampleRate: At least2X highestfrequency ofinterestBNC (SS9L, -50 to +50 Volts max.)BNC Adapter (for MP30)Use when connecting up to externaldevices using the BIOPAC SS9L BNCadapter. Voltage amplitudes should begreater than +- 10 Volts, and less than+- 50 Volts.200 DC5K LPNone -1 mV to -11 mV to 1VoltsMin. SampleRate: At least2X highestfrequency ofinterestBNC (SS70L, -10 to +10 Volts max.)BNC Adapter (for MP36/35), Isolated10 DC None-1000 mV to -101000 mV to10VoltsCardiac Output – dZ/dtCardiac Output – dZ/dt200 DC1K LPBP 0 mV to 05 mV to 2Ohms/secCardiac Output – Z200Cardiac Output – ZDCBP 0 mV to 0OhmsNon-Invasive Cardiac Output Module1K LP50 mV to 100Circuit Probe – Breadboard (-10 to +10mV max)Circuit ProbeMP UNIT Circuit Probe and PowerCable for Breadboard5000 DC5K LPN/A-10000 mV to-5010000 mV to50mVCircuit Probe – Breadboard (-100 to+100 mV max)Circuit Probe500 DC5K LPN/A -10 mV to -5010 mV to 50mVMP UNIT Circuit Probe and PowerCable for BreadboardCircuit Probe – Breadboard (-1 to +1Volts max)Circuit ProbeMP UNIT Circuit Probe and PowerCable for Breadboard50 DC5K LPN/A -100 mV to -0.5100 mV to0.5VoltsCircuit Probe – Breadboard (-5 to +5Volts max)Circuit ProbeMP UNIT Circuit Probe and PowerCable for Breadboard10 DC5K LPN/A -100 mV to -0.5100 mV to0.5VoltsClench Force – kg (SS25LA)Clench Force 500 DC BP 0 mV to 0 kgVisit the online support center at www.biopac.comCalibrationrequired**