BSL PRO Software Guide - Biopac

284 Part EAppendix D — MP Unit SpecificationsMP ACQUISITION UNITThe MP data acquisition unit is the heart of the Biopac Student Lab PRO System. The MP Unit has an internalmicroprocessor to control data acquisition and communication with the computer. The MP Unit takes incomingsignals and converts them into digital signals that can be processed with your computer. There are four analog inputchannels, one of which can be used as a trigger input. You will need to connect the MP Unit to your computer andconnect electrodes, transducers, and I/O devices to the MP Unit. You are encouraged to take a few minutes tofamiliarize yourself with the MP Unit prior to making any connections.The MP36/35 Data Acquisition System is a physiological data recorder designed for medical educational purposes.This system is used in medical education and research facilities. This system is not used for the mitigation, cure ordiagnosis of disease. This device is NOT used in the home. Subject to IEC60601-1, the MP36/35 Data AcquisitionSystem is CLASS II, type BF equipment.SYMBOLS — MP36, MP35, and MP45Symbol Description ExplanationType BF EquipmentClassificationAttentionConsult accompanying documentsOn (partial)Turns MP35 on assuming AC300Apower adapter is powered by the mainsOff (partial)Turns MP35 off if but AC300A poweradapter remains powered by the mainsDirect currentUSBDirect current inputUSB portFunctional EarthGroundFunctional Earth Ground ConnectionClass II EquipmentClass II Medical Equipment, asestablished by IEC60601-1FuseEquipment FuseCOMPLIANCESAFETYThe MP36/35 satisfies the Medical Safety Test Standards affiliated with IEC60601-1. The MP36/35 isdesignated as Class I Type BF medical equipmentEMCThe MP36/35 satisfies the Medical Electromagnetic Compatibility (EMC) Test Standards affiliated withIEC60601-1-2.TYPES OF INPUT DEVICESThere are three types of devices that connect to the MP UNIT: electrodes, transducers, and I/O devices.Visit the online support center at www.biopac.com