BSL PRO Software Guide - Biopac

Appendices 269Analog Preset NameChannel LabelApplicable Calc. PresetsGainXHardwareFiltersAC or DC.05 or .5 HP1K or 5K LPIIRFiltersType,Freq., QScaling(Mapping)UnitslabelRecommendedCalibration &Sample Rate(Samples/sec)Use with the BIOPAC SS25LA HandDynamometer.1K LP3.50 mV to100Min. SampleRate: 100 S/SClench Force - kgf/m^2 (SS56L) 100 DC1K LP1: LP,66.5 Hz,Q=.52: LP,38.5,Q=10 mV to 020.48 mV to3515kgf/m^23: BSLine,Q=1Clench Force - kpa (SS56L) 100 DC1K LP1: LP,66.5 Hz,Q=.52: LP,38.5,Q=10 mV to 020.48 mV to34.47kpa3: BSLine,Q=1Clench Force – lbs (SS25LA)Clench ForceUse with the BIOPAC SS25LA HandDynamometer.500 DC1K LPBP 0 mV to 03.50 mV to220lbsCalibrationrequired**Min. SampleRate: 100 S/SClench Force – N (SS25LA)Clench Force (Newtons)Hand Dynamometer Clench ForceUse with the BIOPAC SS25LA HandDynamometer.500 DC1K LPBP 0 mV to 03.50 mV to981NCalibrationrequired**Min. SampleRate: 100 S/SClench Force - psi (SS56L) 100 DC1K LP1: LP,66.5 Hz,Q=.52: LP,38.5,Q=10 mV to 061.44 mV to15psi3: BSLine,Q=1CO2 Expired (GASSYS2)GAS - CO 2 (Used on GAS-System2) 200 DC1K LPBP1.027 mV to0.0411.02 mV to1% CO2Current Monitor (BSLCBL10)Current/Voltage Drive & Monitor Cable.(DSUB 9M + DSUB 9F to clip leads) 200DC5K LPNone0 mV to 050 mV to 50microAmpDisplacement (cm)Displacement; use with SS14L. 500 DC1K LPBP 0 mV to 01 mV to 1cm