BSL PRO Software Guide - Biopac

Find Next Peak229If you select Find Next Peak from the Transform menu (or select the icon), both cursors will moveone peak to the right while staying above the threshold. The measurement values will show the selectedmeasurements and will automatically update when each new peak is found.Next, repeat the above peak search with the automatic journal entry option enabled. Start as before by selectingthe first peak and choosing Find Peak from the Transform menu. Check the Paste measurements into journaloption and click OK. The journal will now contain the measurement values from the new peak.Find All PeaksWhen you choose Find All Peaks from the Transform menu, the software will find all peaks through the end ofthe selected area (or the entire file, as designated) and paste the measurement values into the journal each time apeak is found, as shown here:The process uses the default cursor settings to select the area between two adjacent peaks. In this mode, onecursor tracks the current peak location while the other cursor marks the location of the previous peak (these“cursors” are internal to the software and only appear in the graph window as “borders” for the propagatingselected area).Each column in the Journal corresponds to the measurement values selected (in this case, Value and BPM). If thedata file is very large, it may take some time to find all the peaks, since the BSL PRO loads data from disk whileit scans for the peaks.