BSL PRO Software Guide - Biopac

24 Part ALaunching the Biopac Student Lab PRO softwareYou cannot run more than one copy of BSL PRO at a time and you cannot run BSL PRO if BSL lessons arerunning; see page 27 for launch error details.MP36/35/30/45 (NOTE: For MP45 hardware, lessons 7, 8, 9, 11, 14 & 20 are not available)Double-click the Biopac Student Lab 3.7.7 icon or use the Windows Start menu to launch the Startup Wizard.Choose the desired BSL application, (or select “Analyze”), and then click OK.After you launch the program, you may receive a warning prompt regarding the hardware, as shown here:To use the Biopac Student Lab PRO software without the MP UNIT hardware, click “OK.” When you’re ready toacquire data at any subsequent time, connect and/or switch on the MP Unit hardware and then restart the software. Ifthe MP UNIT is properly connected, you will not get a warning and the light next to thebutton inthe display window will change from grayed-out to green.If the MP Unit is connected and you receive the Hardware warning when you launch the software, there are twopossibilities:a) You have not properly connected everything and/or you have not powered up the MP UNIT.Visit the online support center at www.biopac.com