BSL PRO Software Guide - Biopac

254 Part EVideo Playback Idle Mode:In this mode, the assigned video will playautomatically on a segment-by-segmentbasis when graph is opened for Playback.(Viewer Play/Pause controls are available inthis mode only)During the capture or playback of audioonly, the media window will be displayedwith a static musical note image as shown atright.The Capture/Playback viewer can be also displayed or hidden by toggling the “Show/Hide Media” button on thetoolbar. (Highlighted below)If a Capture/Playback assignment has not been made, this toolbar button will be dimmed.The Capture/Playback viewer must be hidden in order to access Media setup. If Media setup is accessedwith the viewer present, the following warning will appear:NOTE Media setup also cannot be accessed during active recording or playback. The viewer must first be stopped.Viewing Media in Playback ModeTo view a media file in it’s entirety along with associated graph data, Playback mode must be used.1) After the graph containing media is saved, close the graph and go to FileOpen for Playback.2) Select the saved data file and click “Open”.3) Click “Play” to view a recording of the data, along with playback of the linked media.Visit the online support center at www.biopac.com