Download latest Tool Catalogue as PDF - DICTUM GmbH

Hammers, Nails, Pry Barsaa MILLER ® STEPPED DOWELThe patented Miller dowel is ideal forcreating decorative and traditional corner,T or L joints. The pilot hole is drilledwith the stepped Miller dowel drill bit.The self-clamping dowel has additionalglue grooves for increased bonding. For ashallow drill hole, e.g. in more intricatejoints, only the front part of the dowelis used and the rest is cut off. This givesyou several dowel diameters in one piece.12Ideal for restoring furniture and workingon historical structures.Length 68 mmQuantity 40 piecesMaterial1 Oak no. 720141 8.24 € 9.80 €2 Birch no. 720142 6.89 € 8.20 €3 Cherry no. 720143 10.34 € 12.30 €4 Walnut no. 720144 10.84 € 12.90 €34BB MILLER ® STEPPED DOWEL DRILL BITHSS drill for drilling the holes for thestepped Miller dowels.Shaft fits three-jaw chucks.Shaft diameter 9 mmCutting length 70 mmOverall length 130 mmno. 720140 17.56 € 20.90 €cc MILLER ® STEPPED DOWEL DRILL BITSET WITH 40 STEPPED DOWELSContains a Miller Stepped Dowel Drill BitNo. 720140 and 10 dowels each of oak,birch, cherry and walnut.no. 720145 26.47 € 31.50 €ded JAPANESE PRECISION WOODEN NAILSe TAPERED DRILL BIT, Ø 6 MMFor decorative corner, T or L joints which are exposed to high mechanical loads, conicalwooden nails are the first choice. After pre-drilling with an appropriate conicaldrill, the nails are applied with a gentle hammer strike and a little glue. Also idealfor restoring furniture, music instruments, historical fitted features or to fill smallimperfections. Made of beech wood.For drilling holes for conical woodennails and screws. Made of HSS.Hexagonal shaft.Cutting length 85 mmOverall length 138 mmØ Length QuantityØ3.5 / 1.8 mm 35 mm 20 pieces no. 717528 2.77 € 3.30 € 3.5 mm no. 717520 8.32 € 9.90 €3.5 / 1.8 mm 35 mm 300 pieces no. 717524 33.53 € 39.90 € 4.7 mm no. 717521 9.16 € 10.90 €4.7 / 2.2 mm 45 mm 20 pieces no. 717529 2.77 € 3.30 € 5 mm no. 717522 10.00 € 11.90 €4.7 / 2.2 mm 45 mm 300 pieces no. 717525 33.53 € 39.90 € 6 mm no. 717523 12.52 € 14.90 €5.0 / 2.5 mm 60 mm 12 pieces no. 717530 2.77 € 3.30 €5.0 / 2.5 mm 60 mm 180 pieces no. 717526 33.53 € 39.90 €6.0 / 3.0 mm 88 mm 6 pieces no. 717531 2.77 € 3.30 €6.0 / 3.0 mm 88 mm 90 pieces no. 717527 33.53 € 39.90 €www.more-than-tools.dePrebena ® Hammer Tackeravailable online.fgforged nailsBecause of their square shafts (larger surface area than conventional round nails)and coarse surfaces, forged nails are more difficult to pull out than the conventiontalround nails commonly used today. Their shafts are tapered, resulting in an equaldistribution of pressure along the length of the nail, which also makes it harder topull out and lowers the risk of splitting the wood. The nails are primarily used incarpentry, boat building and restoration.f PLANK NAILLarge four-faceted head, thick shaft, for larger dimensions.Cold-drawn, blued steel. 1 pack = approx. 100 pieces.Length Shaft50 mm 3.1 mm no. 830123 5.13 € 6.10 €60 mm 3.2 mm no. 830124 6.22 € 7.40 €70 mm 3.4 mm no. 830125 7.31 € 8.70 €g DOOR NAILLarge four-faceted head, slender shaft, also suitable for decorative purposes.Cold-drawn, blued steel. 1 pack = approx. 100 pieces.Length Shaft30 mm 2.5 mm no. 830113 3.78 € 4.50 €40 mm 2.8 mm no. 830114 4.96 € 5.90 €hh SHAKER NAILSManufacturedusing traditionalmethods:These decorativecopper nails arebeaten in theUSA on originalmachines datingfrom the 19thcentury. They areused to rivet theframes of shakerboxes, for delicatecraftsmanshipwork, modelconstruction, leather applicationsor for ornamental purposes.Length Quantity5 mm 400 no. 830142 7.48 € 8.90 €8 mm 300 no. 830143 9.16 € 10.90 €ii BRASS RIVETSFor the widest variety of materials, inparticular for the assembly of knife gripplates, for joining thin components madeof wood, metal, plastic, leather or fordecorative purposes. If necessary, thesecan be cropped, and the heads can berounded off. They are driven with a hammer(if necessary, with dimpling punch).1 pack = 50 capsules and 50 bolts.* maximum thickness of the materialswhich are to be joined togetherShaft Ø 4 mmHead Ø Thickness*6mm 11mm no. 830150 6.97 € 8.30 €6mm 15mm no. 830151 7.73 € 9.20 €8.5mm25mm no. 830152 10.50 € 12.50 €Wrecking BarsJJ WRECKING BARSReliable wrecking bar made of fullyhardened spring steel and therefore particularlylight. The wide, precision-groundpry tips at both ends allow the bar tobe easily wedged without damaging thesurface of the piece. 10-year warranty.Overall length 270 mmMax. nail shaft diameter 8 mmWeight 340 gno. 705975 37.31 € 44.40 €Overall length 500 mmMax. nail shaft diameter 10 mmWeight 950 gno. 705966 40.08 € 47.70 €Overall length 600 mmMax. nail shaft diameter 10 mmWeight 1300 gno. 705976 45.80 € 54.50 €Overall length 700 mmMax. nail shaft diameter 13 mmWeight 1800 gno. 705977 54.79 € 65.20 €Overall length 900 mmMax. nail shaft diameter 13 mmWeight 2400 gno. 705978 67.23 € 80.00 €Order hotline: Phone: +49-(0)991-9109-902 or +49-(0)1805-9109-902* • www.more-than-tools.de 127